No Blue Wire From Ceiling
No Blue Wire From Ceiling. Connect the white wire from the ceiling to the white wire from the fan. The colors white and gray indicate a neutral wire.
If your ceiling fan does not have lights, the same step will be applied. The blue wire is the hot wire for the ceiling fan light fixture. Having done this, connect the brown core to the live terminal of the rose, the blue core to the neutral terminal, and the earth wire (usually protected by a green and yellow sleeve) to the earth terminal.
A Copper Ground Wire Should Also Be There.
The ground wire carries displaced electricity away to reduce the risk of electrical shock if, let's say, the metal parts of the ceiling fan or any other. On my instruction installation manual it had absolutely no information on where the blue wore went. Turn wire connectors upward and push the.
This Means That Power And Ground From The House Wires Not Only Power The Fan, But Power The Receiver So That The Receiver Can Obtain Instructions From The Fan Remote And Use Those Instructions To Power.
Now, inspect the ceiling fan wires. Blue and yellow electrical wires. Instead, blue and yellow wires are used as the live wires pulled through a conduit.
If Your Ceiling Fan Does Not Have Lights, The Same Step Will Be Applied.
There should be one each black and white wire. I've attached a picture of the four wires that are coming out of the ceiling, and i think the top black wire was going into the hole where the brown wire was connected on the ceiling rose pendant, and the bottom black wire was going into the hole where the blue wire was connected on the ceiling rose pendant. Why this ceiling fan wire is blue?
While There Are Blue Wires For Light.
There is no ceiling rose l,think when they installed sound proofing,the ceiling rose was covered under the sound proofing,and now there is only one pendant wire hanging out or ceiling which has blue and brown cord. In other words, if your accompanying ceiling fan wire is not blue, and it is red, and perhaps there is no red wire in the electrical box, just locate the wire used in the electrical box for its light fixture and connect the blue or red wire from your ceiling fan to it. It helps in working with the light fixture and lighting it up.
It Is There Only To Distinguish Between The Different Functions Of The Fan Assembly (One For Motor, One For Lights).
If your ceiling fan does not have a light fixture, then you can either cap off the blue wire up at the ceiling fixture electrical box or connect is as described above. Connect the black wire from the ceiling to the black and blue wires from the fan. Twist it together with the bare wire from the house circuit.
0 Comments